January 27, 2013

Mixing Prints with Simplicity 2458

I love mixing prints--or in this case mixing a pinstripe and a print. This Simplicity design 2458 isn't something I'd normally use. But I think it's cute:


I have not been satisfied with the fit of most patterns recently, but this one is a gem. The top has elastic inserted in the back near the waist which creates a better fit.


I learned much about ribbon while doing this little exercise. From now on I'll work exclusively with silk or rayon whenever possible. Polyester can be stiff, and it doesn't drape the way I'd like it.

I changed my photography set-up, and that was a bad idea. A few unwanted shadows in these photos, but if I wait for perfection, I'll stand still.

One of the purposes of this blog is to show my setbacks as a doll clothes maker and designer. There is more to learn than I had anticipated but this process has given me the opportunity to see what other doll clothes and patterns are available and what other doll clothes lovers are doing.

January 15, 2013

How Do I Set in a Doll Clothes Sleeve?

(Blog author's note on January 25, 2013: After working with more sleeves, I realize that--although doll clothes differ from people clothes--my sleeve problem is in the design of the pattern and not in the skill of my sewing. But I will eventually post some easy sleeve patterns to clear up the nonsense for good.)

I am befuddled when it comes to setting in sleeves for my American Girl doll. I have approached sewing with confidence and patience. I will remove stitches with a seam ripper and stitch again, if I must.

I wish I had photos of the many garments that I've made for myself. When I was in high school my mother took my aunts through my closet while bragging about my accomplishments. I merely boast to provide perspective here because. . . .

I don't seem to be able to set in a sleeve for my dolls. I have succeeded a couple of times, but these were by hit and miss. I've spent so long trying to master the sleeve that I'm close to throwing my sewing machines and Sergers out the window (the visual is somewhat satisfying).

Here is my problem: I do not want tucks in my sleeves. Gathered, full sleeves are another matter, but a jacket or casual dress or blouse should be smooth where the sleeve joins the armhole.

I just praised the book Dressing up 18" Dolly by Lorine Mason in my last blog entry. She gives practical instructions about most sewing, addressing the neatness of the inside of the garment. For instance, she uses a lot of bias tape to finish hems. She also suggests using a different color bobbin thread when making gathers in fabric (for a skirt or a sleeve). The color difference makes pulling on thread together much easier. Removing these temporary threads is easier as well.

I was hoping that Lorine Mason could clear up the mystery of mastering the set-in sleeve, but alas. I'm more confused that ever. Her sleeve patterns are too big for the bodice. I cannot connect them without unwanted tucks and gathers.

To be honest, I notice gathers in some of the photos of her completed garments (she uses the same sleeve pattern for each garment in the above-mentioned book). But other sleeves look perfect. I've almost finished her Cropped Jacket. I need to attach the finished sleeves and the bottom ruffle, and that's it. But I've made several attempts to sew the sleeves to the bodice, and I'm just not happy. I was once an expert sewer or seamstress--or sewest--but I feel like I'm treading water.

I've found some great advice at Adams-Harris.com, a beautiful clothes pattern designer (for BJD size). After addressing the challenge of setting in sleeves of doll clothes, she often prefers to attach her sleeves by hand.

I don't know whether to finish my current project with another attempt to put the sleeve in by hand or whether that method will work with this particular pattern. I wish Lorine Mason--or other doll clothes creators, for that matter--addressed the sleeve issue in their directions. If I didn't have so much other sewing experience, I'd probably quit making doll clothes all together, thinking I simply had no sewing talent or potential.

Once I find a sleeve that works for me, I may hold on to that particular shape for everything with sleeves (nothing of course the size of the arm hole). I will continue to make notations in this blog about my relationship with set-in sleeves.

January 11, 2013

Give Your Doll Clothes a Professional Look

(Update January 19, 2013: I still love the designs in this book. However, I made--or attempted to make--the Cropped Jack, and the sleeve was too big to set in without gathers or puckers in the sleeve seam line. Although I admit to finding set-in sleeves a challenging part of doll clothes making, I've been able to put other sleeves in. I certainly have no trouble with sleeves of my own garments. I visited the author's website and left her a note. No response yet.)

~~~~~~~~~~~~~~~~~~~~~~

I love this book!


I will tell you why:

I have sewn everything from coats and suits to prom dresses. But sewing for an 18-inch doll is simply another matter. Although I have many cute ideas for doll clothes, I have found myself disappointed in my results.

Most written instructions do not take in to account the significance of the 1/4-inch seam, as opposed to the usual 5/8-inch seam that is used in patterns for people. There is less room for error with the smaller seam; the finished garment will be too snug if the seam is too big or the fabric can easily ravel to the seam line if the seam is too narrow.

Making doll clothes look neat on the inside is important, especially if you're selling them. I've had to change the way I think about seams after years of pressing them opened to get the garment smooth and flat. Most of my seams now face one direction, and I finish seams whenever possible.

I don't think that Simplicity, the best-known pattern company, accounts for the differences between people and dolls. It is difficult for me to turn a hem under just once--per Simplicity's instructions--because the raw edge looks unfinished underneath, especially with fabric that ravels.

Dressing up 18" Dolly has practical instructions for sewing doll clothes. One suggestion, for instance, is to finish the edges of some seams before joining the two sides together. This is a small book with some super cute patterns, and I will give more concrete examples after making one of the patterns myself.

A couple criticisms of the book: The photos taken of the doll clothes could be much better. Also, I prefer American Girl or Madame Alexander as doll clothes models. Springfield dolls are cheaply made, and they look like cheap dolls. Would I buy my child a Springfield doll? Yes. But the doll doesn't photograph as well.

January 8, 2013

Reviewing My Sewing Machines

I just added a new toy to my sewing machine arsenal, a Singer 9960 Quantum Stylist.


I'm trying NOT to spend money, but here was my quandary: My normally dependable and lovely machine is a Kenmore 19606. Although I've always wanted a Bernina or a Viking, I've been too practical to go for the top-of-the-line anything. I've used Kenmore machines since I bought my first one at age 18.

The 19606 is my best Kenmore to date, but after awhile it developed a small but significant problem. The bobbin winder quit working. Before I realized that I could buy a portable bobbin winder or previously threaded bobbins, I took my machine to Sears to have it repaired. Sears sends all sewing machines to a special place, and getting it back requires patience and time.

By the way, I knew exactly what was wrong with the machine and what part I needed, but taking the machine apart was far too risky. I included a diagram with the machine, showing Sears exactly what was wrong, but Sears gives no discount for my research. When I got the machine back,  the bobbin threader winder worked but the machine's perfect stitch had been altered when it was cleaned.

Unfortunately, I put my machine away for awhile. When I used it months later, I realized that although the bobbin winder worked, it would only fill the bobbin 1/3 of the way before sticking.

At this point I bought a bobbin winder. I also bought several filled bobbins with either black or white thread. Don't do this. After years of sewing I recently realized that having the same weight thread on the top and the bottom is essential for a perfect sewing stitch.

When I decided to become a serious doll clothes designer, I bought a Serger. I like to finish the seams properly in anything that I make, and using a regular zig-zag stitch adds bulk to the seams. First, I bought a Brother Serger 1034D that is a lovely machine but difficult to thread. The instruction booklet and the accompanying DVDs were limited. I eventually threaded it by finding some instructions on YouTube. But even with instructions, threading the machine was a pain in the behind. Since I'd always gotten by with conservative machines, I finally splurged and purchased a Baby Locke Imagine. This Serger threads itself, and it's easy to use.

I take that back:

January 2, 2013

Girls Just Want a Fun Hat

Note to self: Do not make this dress pattern again. In fact, toss it into the garbage. My model below looks as cute as a button. I saved her "look" by giving her a hat.


This hat is a strip of velvet knit, folded in half (right sides together) so that the fabric becomes a thinner strip with the ends cut diagonally. I stitched the fabric together on the long edge, leaving an opening in the center, large enough to turn the strip right-side out. I folded this thick velvet strip into four pleats and tacked the pleats together. I gathered a piece of netting down the middle and tacked it onto the velvet. I added a flower, and voila! I attached the hat to the doll's head with a hat pin.

When I make a new outfit, I try it on all my dolls to see which one looks the best. Any black in the fabric looks best with black hair--or blonde hair. Not brown. I have plenty of beautiful shades of browns and tans for my brown-haired dolls.

Here's a full shot of the dress, Simplicity 4654. This dress was supposed to be a holiday dress. I'd planned to add a beautiful black sash and bow, but the bodice is far too loose at the seam line under the chest.


I previously made this same pattern in an October 14, 2011, blog entry. I remember thinking that perhaps I'd stretched the fabric. But I was careful this time. The bodice might be loose to ease the fit of the set-in sleeves.

Setting in a woman's or child's sleeve is easy. You put a row of basting stitch on the stitch line and ease the sleeve fullness into the bodice without making an ugly tuck in the sleeve. With doll sleeves, it's easy to make an unwanted tuck in the under-arm area of the bodice. I notice that most of the sleeves of the eight-inch Madame Alexander costumes are very full and gathered. These full sleeves are probably easier to sew.

Any suggestion for perfecting the setting in of doll clothes sleeves would be appreciated.