Dress for the Holidays

Here's another dress with holiday colors. I started with Simplicity 7083 but made several changes.

I used my own straight skirt but added just enough gathers so the doll could pull the dress over her hips to get into it. In other words, I wanted a fitted skirt without adding darts, so I put gathers in the back of the dress.

I think I got this dress a bit too short. I've been experimenting with fit and hem length. These dolls have weird proportions to start with. The length from the waist to the middle of the knee is about 5-1/2 inches, but from the crotch to the knee is less than 3 inches. When a doll skirt is too long it doesn't look stylish unless it's a gown. But a cut above the knee may reveal the doll's undies.

As in the previous blog entry, I love combining two different prints.

Winter Fashion Line

Here's my first holiday dress of 2012. I'll eventually have Christmas dresses for all my dolls--and maybe some of yours.

I've embellished Simplicity #4364. I like the way the bodice fits, but I shortened the skirt quite a bit, and I added these polka dotted inlays. I actually made a beautiful white shrug to go over the dress, but the shade of the shrug made me realize that this white background here is not truly white. The shrug doesn't match, but look out. The shrug will be featured shortly.

Here's a full view that shows these adorable party socks and shoes.

I've finally got my mojo working, and I have so many ideas for doll clothes. I hope to have some patterns available in the next few months.

My Red-Haired Harmony Club Doll

I didn't exactly NEED another doll, but I wanted one with red hair to round out my rainbow of 18-inch dolls. These Harmony Club dolls differ somewhat from American Girl. They have wigs instead of rooted hair, but they are sturdy enough for little girls to play with. Isn't she beautiful?

This photo of the fully clothed Kaitlin belongs to Harmony Club Dolls; she is $88.00. I purchased her in plain underwear for $75.00.

More on Using a Serger

If this blog peaks your curiosity, please don't give up on me. My blog entries will become more regular beginning NOW.

I believe that my last blog entry was deceitful. I have still been afraid of my serger. Like it or not, there is a learning curve that I think I've just about overcome.

I now see that my serger is distinctly different from my regular sewing machine.The sewing area of the serger--including the presser foot, the feed dog, and the markings used to line up the fabric--is distinctly different from that of my Kenmore computerized sewing machine:

1. Fabric can not be placed directly underneath the presser foot. It must be placed in front of the presser foot, barely underneath the front of it, where the feed dog grabs the fabric and pulls it along.
2. There are no margin markings to the side of the presser foot; margin markings are toward the front.
3. Moving the threads away from the presser foot may require the use of tweezers. 

Getting the fabric ready to sew feels awkward at best. Experience with a regular sewing machine almost makes serging more confusing. Nevertheless, here is my latest stitch. This is a three-thead narrow overlock stitch done with two lower loopers and one needle thread.

I think that having support with the serger makes using it much more enjoyable. Since I cannot buy a serger in my town or take a class in my town, I joined a couple of online support groups for those with sergers. I have been studying (the serger book) and practicing some of the suggestions in the book. At some point a light went on, and I think I understand the inside workings of the serger.

In spite of my small successes, I decided to invest in a serger that is manufactured by a company who specializes in sewing machines. I am now the proud owner of a Babylock Imagine BLA1AT. 

Although I have vast sewing experience, I have shied away from working with knits. Because I want to be able to make my American Girl tights, pajamas, t-shirts and other stretch garments, I am determined to finally master a machine that will assist me.

More about Babylock in my next blog.

Don't Be Afraid of Your Serger

Perhaps my relationship with my serger will offer some insight to someone else: I bought mine a few months ago, and until last week, it served as a stylish metal sculpture, decorating my sewing room table. Because I wanted to move forward with my doll clothes design business, I didn't want to take the time to learn my serger; so there it sat.

I have spent so much time trying to make the inside of my garments pretty with my regular sewing machine. I simply don't want my name attached to something sloppy.

After bumping "learn serger" from my TO DO list several times, I made a commitment to be mature about this wonderful machine that I'd yearned for. When I read the threading directions, I fell asleep. Fortunately, my Brother 1034D came with two instructional videos. I was serious about learning, so I turned off the TV and my iPod. I closed my window shades and put my telephones in another room. No distractions.

But what happened? While watching the video on learning to thread, I kept nodding off.
B-O-R-I-N-G. Geez, this was painful.

Fortunately, I'm a resourceful person, especially when it comes to getting sidetracked and goofing off. I thought I'd do better with sewing lessons. If I could find a real person, a warm body, demonstrating how to thread the machine and watching me thread the machine, I'd have better luck. Unfortunately, I found no sewing classes in town or even nearby. We have a Michael's. No Joann's. I found a local woman who teaches children how to sew. I sent her an email, asking her if she taught serging. Or did she have any recommendations for me?

No response. The good news is that once I get the serger figured out, there is probably a demand for a local sewing (and serging) instructor, if my doll clothes pattern business doesn't fly.

Finally, some light at the end of the tunnel: I went to YouTube, looking for better instructions, and I found a woman who posts as "ArtistKae," with updated instructions for the Brother 1034D. While listening to her describe her relationship with her serger, I realized that my "sergerphobia" was common indeed. She had also been frustrated with the Brother instruction booklet. After watching her video, I realized that I was only confused about one small part of the procedure, and she cleared up the fuzziness for me.

If you are having trouble threading your serger, I suggest searching the internet, especially YouTube, to find up-to-date instructions on your exact serger model. Then consider these thoughts:

1. The serger uses two needles and two loopers. The thread from the loopers is not part of the actual seam. These two spools stitch the outside of the seam. Understanding how the machine actually works helps to make sense out of threading it.

2. Most of the actual threading is easy. Only one of the loopers is confusing, and it's only one of the steps of that particular looper that creates confusion. In other words, out of 30 or so threading steps, only one step is confusing.

3. The looper compartment is difficult to see for someone with old lady vision. Once I realized that my vision was contributing to the "fuzziness" of my brain, I looked at the compartment through a magnified class to get a clear view of what ArtistKae was describing. Once I got a clear view, I didn't need the magnifying glass.

4. Threading a serger is awkward. I have two left hands while threading my machine (apologies to my two sisters who are "lefties"). Pulling the thread through the needles and loopers feels especially strange during the last step. All threads must flow in the same direction, underneath the feed dog to the left. Long tweezers are helpful here.

5. Last of all, you can put pedal to the metal and off you go, even if there's no fabric between the presser foot and the feed dog. The serger doesn't tangle like a regular sewing machine with a bobbin.

Here's my first attampt at stitching. Kinda pretty, isn't it?

But I still need to make adjustments. This stitch is a bit wide. I ordered a book that will help me adjust the tension nobs, and the width and lengths of the stitches. I'm determined to MASTER this machine. My goal is to be able to actually sew several doll garments in one afternoon so that I can spend my time designing clothes. (To be continued....)

Finishing Doll Clothes Seams

My long-term goal is to design doll clothes and sell digital patterns. I decided to reacquaint myself with sewing doll clothes first. This blog is about this process. I learned to sew by making doll clothes, but I'd left the world of doll clothes behind until my granddaughter came into my life.

My recent forage into sewing doll clothes has been time well spent. Here are some examples of what I've learned so far:

1. Avoid choosing patterns with set-in sleeves whenever possible. A doll's arm hole is so small that this process is tricky at best, especially if you don't want your sleeves to pucker. Gathered full sleeves are something else all together; they are still a challenge.

2. Avoid working with velvet and other fabrics that can't be ironed, if the pattern is complicated. Ironing seams is usually one of the keys to good sewing.

3. Make sure that a pattern fits the doll--no matter what measurements are on the envelope--by testing the garment at various stages. Make sure to keep the seams at 1/4 inch.

I learned to set in a sleeve of my own clothing when I was 14 years old. No puckers. I also made myself a beautiful velvet dress my senior year of high school. Numbers 1 and 2 above are recommended for those who want quick success without having potential problems.

Here is the biggest challenge--for me. I like the inside of my garments to look neat and finished. To understand this preference, look at the inside of some doll clothes. The quality of doll clothes vary, depending on the manufacturer. American Girl doll clothes are expensive, but the quality is first rate. Some Target and Walmart doll clothes that can look cheap are acceptable for children, but not for someone like me who notices everything and not for someone who wants to sell their finished product.

The above photo shows the inside of two garments. The checked dress by Madame Alexander is finished with a professional machine. The small hem is turned under one time. The polka dot skirt is sewn by moi. In order to get a clean look I turned the hem under twice before I stitched it, which made it bulkier than I prefer.

Giving doll clothes a finished look is a challenge--for me. If I leave the inside seam raw, it will look ugly, and it will ravel. If I zig-zag the seam with my regular machine, the seam puckers. (I have tried various types of zig-zag stitches on my computerized machine.) If I turn the seam under and stitch it, the garment becomes too bulky. And I end up using more than 1/4 inch for my seams. By the way, general clothing patterns have 5/8-inch seams. Doll clothes patterns have 1/4 inch-seams.

My solution: I recently purchased a Serger at a very reasonable price. The Serger will give my seams a beautiful finish, and I'll be able to make tights, pajamas, underwear and garments that stretch. Although the Serger will help to streamline all my future sewing, it can be a complicated, intimidating machine. (More about mastering the serger in my next blog entry.)

Fabric, Color and Model Choice

This skirt and top (Simplicity no. 2296) look like a three-tiered dress. The coordinating pieces were easy to make. I hadn't planned to use trim like the sample on the envelope because I'm generally not a fan of Rick-Rack. Unfortunately, the pieces didn't look right without a trim, so I set this project aside until I found this somewhat unique black trim; it's a bit lacy close up.

My Asian Madame Alexander doll looks stunning in black and any prints that contain black. I generally choose my models with color in mind. For instance, the colors in this print would do nothing for a brunette or red head. Blonde would be okay. But black is awesome.

Love Me Some Polka Dots

This simple skirt is from Simplicity no. 4347. The bulkiness of all the gathers made the waist band of the skirt far too tight. Fortunately, I'd basted the skirt to the band with a loose running thread before permanently joining the two pieces. I was shocked that the fit was tight on both American Girl and Madame Alexander. No problem. I just made a longer waist band.

I added both the white top-stitching and buttons to the pockets before affixing them to the skirt. Then I added the pockets using a slip stitch with black thread.

My dolls need more plain blouses as separates. This top--a different and separate pattern Simplicty no. 2296--was supposed to include short sleeves. When I had difficulty keeping the puckers out of the sleeves, I realized that this particular pattern called for "knits only." I removed the sleeves and finished the arm holes with bias tape.

This is my "Brandi" doll, as she has an uncanny resemblance to my daughter-in-law. She is rocking some black and white saddle shoes with flirty ankle socks. Her rhinestone shades complement her fifties ponytail.

Vintage Fashion in Doll Clothes

I lean toward three periods of time when it comes to costumes or doll clothes:  the forties, fifties and late sixties (early seventies). Since I began sewing in the late fifties, and I made all my clothes in high school, I am well-acquainted with clothing styles from my school years. This blog will eventually show my love for "hippie" clothes. As Susan St. James once remarked in Kate and Allie, "My husband wanted to live like a gypsy; I just wanted to dress like one." Her comment sums up my love for that period of time.

But my favorite fashion is clothing from the forties. I particularly love dresses that are cut on the bias. I am curious to see if this book I just ordered, called Blueprint for Fashion: Home Sewing Patterns of the 1940s, will address the bias cut, and how it came about:



Please note: I only provide links to books that are special to me. The Amazon Associates program provides HTML code for the links that I need. You will not find me selling coffee makers and fertilizer on this blog.

Still a Learning Blog

This blog entry continues the coat story from my last entry. This coat has been an exercise in patience. But hopefully I've learned something that will benefit me.

Many people say they don't have the patience for sewing. My mother taught me how to use a seam ripper almost immediately. A seam ripper makes it possible to remove stitches without ripping the whole seam--usually. A good seamstress must be willing to remove stitches and start again. A good seamstress should try to make something out of a big mess when necessary.

I decided to line the red velvet coat pictured in the previous blog. Lining a doll coat is on the silly side; who cares if the coat is lined? Certainly the doll doesn't. Certainly my five-year-old granddaughter doesn't. My idea was to have Christmas outfits for all my 18-inch dolls, and I could eventually sell the coat on eBay if I wanted to trade the time I spent for a few dollars.

Once I found a shade of red or maroon that slightly matched the red velvet, I put together the lining rather quickly. I used the coat pattern, and whileI began to tack the lining into the inside of the coat, I trimmed the lining to fit the inside. I thought this was a full proof method that would allow me to make adjustments if needed. Unfortunately, the lining didn't improve the way the velvet hung; it made it worse. See the following photo:

I don't like the way the velvet puckers down the front, and I didn't want to tack the facings to the velvet itself. I'd hoped that the lining would somehow make the inside smoother. But it did not. In addition, the ripple of the side seams might be an odd feature of the velvet, but I think my lining is a bit too long. As I contemplated shortening the lining--after spending way too much time on this coat--I discovered a hole under the arm in the sleeve seam where the fabric had unraveled.

If I do post another photo of this coat, I will have found a safe way to set it on fire without burning down my house.

My doll clothes pattern business is off to a slow start. I hope I've learned something from this time-consuming experiment:

1. Don't work with velvet unless the pattern is very simple;
2. Keep set-in sleeves--when working with small armholes--to a minimum.
3. Keep patterns simple in general--at least until I develop some kind of rhythm in my sewing and work habits.

I promise to feature some doll clothes worth sharing very soon.

Holiday Dress and Coat: Working with Velvet

Last December I decided to begin a new tradition.The plan is to make a holiday outfit for each of my 18-inch dolls that include two American Girl Dolls and four Madame Alexander dolls.

The coat below (Simplicity 3547) is meant to be worn over this dress (Simplicity 3551). Sewing this red velvet was a time consuming, learning experience. It was virtually impossible to sew two layers together without one layer sliding away. Although I was careful to only steam the seams and not touch the fabric with an iron, one layer of my seams ended up rippled.

I had previously sewn with velvet, and I knew to cut each pattern piece going the same way on the nap. I sewed a beautiful dress for myself in high school, but I made the set in sleeves with a light-weight transparent fabric. Setting in these little doll sleeves was quite a chore.

Sandra Bezina gives some great advice on sewing velvet in her book Fabric Savvy. She suggests underlining the garment with prewashed silk organza or cotton batiste. Unfortunately, I forgot that I owned this reference book until I already had the garment together. Bezina also suggests using a lighter weight fabric for the collar underneath and the facings, but finding fabric to match the velvet has been a real challenge. I have decided to line the coat, but I haven't found matching liner either. Hopefully, the liner will make the garment smoother and, therefore, less bulky. I will add buttons after I add the liner.

I love the fit of this basic sleeveless dress. I matched the plaid design on the dress side seams. I tried various red ribbons and trims to decorate the dress but decided it needs a belt, which I will make once I find a miniature buckle. I will repost both of these garments after putting the finishing touches on them.